Injection Molding Supplier: How to Vet a Molder First
Last Updated: November 2, 2026
Answer Capsule: Vet an injection molding supplier on five things before you send a tool: the presses and resins they run, who builds and maintains their molds, what inspection ships with the first lot, how they handle a failed lot, and whether mold ownership is in writing. Many good small molders hold no certification, so ask what they do instead.
Your molder is slipping. Lots arrive late, the last one had short shots, and the owner stopped returning calls. Either way you are about to pick a new injection molding supplier, and the mold, the program and your launch date are riding on the choice.
Picking well is not complicated, but it is specific. This guide gives you the questions to ask an injection molding supplier before you commit, a site visit checklist, the red flags that end a conversation, and an honest look at what certifications do and do not tell you, plus what should happen when a lot fails and how to protect the mold you own. Legacy Molding in Phoenix hears these questions every week, and Brent Hanke would rather you ask all of them than find out later.
What should you ask an injection molding supplier before you commit?
Ask about presses, materials, tooling, inspection, capacity, mold ownership, references and failure handling, and write the answers down. A molder who can answer all nine without hedging is already ahead of most.
- What press range do you run? A shop running presses under 200 tons makes hand-held housings and brackets, not totes or bumpers.
- Which resins do you run regularly? Glass-filled nylon, PEEK and Ultem take different drying, barrels and tool steel than ABS and polypropylene.
- Who designs and who builds your molds? Most molders of modest size design in-house and build through tooling partners. You want one owner of the design.
- What ships with the first lot? A first article inspection report with every dimension measured for every cavity, plus the resin supplier’s material certification. Aerospace buyers should ask about AS9102 Forms 1, 2 and 3.
- How do you check parts during a run? Calipers and height gauges at set intervals is a real answer. “Our operators watch it” is not.
- What is your capacity, and what is my lead time? Ask for open press hours, not a promise. Domestic production parts ship in 2 to 6 weeks, against 8 to 16 weeks overseas.
- Who owns the mold? You do, if you paid for it, but only if the quote and the purchase order say so.
- Can I talk to two customers with parts like mine? A molder with happy customers will find two.
- What happens when a lot fails? The answer should describe containment, root cause and a corrective action, with a name attached.
What should you check on a site visit?
Check the floor, the tool room, the inspection bench and the paperwork, because the quote tells you what a molder says and the floor tells you what they do. A visit to a domestic molder is a drive, not a flight. Bring this list.
- Presses. Are they running, and are the ones on the quote actually on the floor?
- Material handling. Dryers on the hygroscopic resins, labeled hoppers, resin lots traceable to a bag or gaylord.
- Molds in storage. Tagged with the owner’s name, greased, covered, with a maintenance log nearby.
- Inspection bench. Calibrated calipers and height gauges, a drawing on the bench, a log of what was measured and when.
- Paperwork. A recent first article report and a material cert for a running job, with the customer’s name covered.
- The people. Who answers the phone, and who runs the floor? At a small molder it may be the same person.
Legacy Molding’s floor at 4415 S. 32nd St. in Phoenix is open to customers Monday through Friday, and the FAI binder and the mold maintenance log are the first two things Brent Hanke shows a visitor. The page on how Legacy Molding runs production injection molding describes what a visitor would see.
What are the red flags when choosing a molder?
The red flags are a quote with no assumptions, no first article report, no maintenance records on their molds, vague answers about who builds tooling, and any hesitation about putting mold ownership in writing. One of these is a question to ask. Three is a reason to leave.
- A quote with no assumptions. No cavity count, no cycle time, no material grade, no mold class. The price cannot be compared or held. Mold classes should follow the PLASTICS Customs and Practices of the Moldmaking Industry guide, so Class 101 means the same thing on every quote.
- No first article report, or a “pass” with no numbers. A report should list every dimension, the measured value, and the instrument used, for every cavity.
- No maintenance records. If their own molds are not logged, yours will not be either.
- Mold ownership gets vague. “We will work that out” means the tool may not leave.
- The lowest price by a wide margin. Someone left something out: inspection, packaging or freight.
Do you need a certified molder?
You need a certified molder when your customer or your regulator requires one, and for everyone else the honest answer is that many good small molders hold no certification at all. The usual ones are ISO 9001 for a general quality system, ISO 13485 for medical devices, AS9100 for aerospace, IATF 16949 for automotive, and ITAR registration for defense technical data.
If your program requires one, ask the molder what they hold and ask to see it. If it does not, ask what they do instead. Legacy Molding holds no quality certification and does not claim one. What Legacy Molding does is scientific molding process setup on every tool, a first article inspection report with every new or transferred tool, in-process checks with calipers and height gauges, material certifications from the resin supplier on every lot, and lot traceability from resin to shipment.
A certificate proves a system was audited. A first article report with real numbers proves your part was measured. Ask for both, and if you can only have one, take the second.
A molder who ships FAI reports built on the AS9102 form structure, with a ballooned drawing and every characteristic listed, gives aerospace buyers what they need. The post on what a first article inspection report must show lays out that structure, and SAE’s AS9102 standard is the source, including the rule that a change in design, process, tooling or location, or a two year lapse in production, calls for a new FAI.
What should happen when a lot fails?
When a lot fails, a good molder contains the lot, finds the cause, fixes it, and tells you what changed, in days rather than weeks. Here is a situation Legacy Molding hears about from buyers looking to move: a lot of housings arrives with sink marks on a cosmetic face, the molder says the parts “met the drawing,” offers a credit, and ships the next lot from the same setup. The next lot has the same sink.
The right sequence:
- Contain. Hold the lot, sort or scrap what is in-house, and tell you how many parts are affected.
- Find the cause. Sink on a cosmetic face usually traces to pack pressure, a thick section under the face, or cooling at that spot. The molder should say which.
- Fix and prove it. Adjust the process or the tool, run it, measure the parts, and send you the numbers.
- Write it down. A short corrective action note that travels with the job.
Ask every molder you vet to walk you through their last failed lot. The story will tell you more than the brochure.
How do you protect the mold you own?
You protect your mold by putting ownership in the quote and the purchase order, tagging the tool, keeping the design files and maintenance records yourself, and knowing in advance how a transfer works. The mold is the most expensive thing in the relationship, and it lives in someone else’s building.
- Get ownership language in writing before the tool is cut or moved, and confirm the tool is tagged with your company name.
- Keep a copy of the mold design, the setup sheet, last-shot samples and the maintenance log at your own plant.
- Ask what the molder needs settled before a tool can leave, so there is no surprise if you move it.
If you are moving a tool from a molder that closed or fell behind, the post on how to transfer an injection mold without losing production lists what to collect first. At Legacy Molding, a transferred tool is inspected, cleaned, sampled and measured in a first article before production starts, and it stays yours.
Frequently Asked Questions
What questions should I ask an injection molding supplier?
Ask what press sizes and resins they run, who designs and builds their molds, what inspection ships with the first lot, how they check parts during a run, their capacity and lead time, who owns the mold, and what happens when a lot fails. Write the answers down.
Does an injection molding supplier need to be certified?
Only if your customer, your regulator or your own quality system requires it. Many good small molders hold no certification and run disciplined processes with first article inspection, in-process checks and material certs. Ask what the molder holds, ask to see it, and then ask what they do on every lot.
How long does it take to qualify a new injection molder?
For a sound transferred tool, a receiving molder typically needs 2 to 4 weeks to inspect, sample, measure a first article and release production. A new tool adds the build time, 2 to 4 weeks for a simple mold or 6 to 12 weeks for a complex multi-cavity mold. Vetting itself, including a site visit, can be done in a week.
Conclusion
Three things to take with you. Vet the molder on what they run, who builds their tools and what ships with the first lot, and verify it on the floor. Treat certification as one answer among several, and a real first article report as the one that matters most. Put mold ownership in writing before the tool goes anywhere.
Do that and the next molder will be the last one you need to find. Legacy Molding in Phoenix answers every one of these questions on the first call. Send your CAD and annual volume for a quote with DFM notes, or call Brent Hanke at 480-256-9773.
Sources
- SAE International, AS9102C Aerospace Series, First Article Inspection Requirements (revised June 2023): https://saemobilus.sae.org/standards/as9102c-aerospace-series-first-article-inspection-requirements
- Plastics Industry Association (PLASTICS, formerly SPI), Customs and Practices of the Moldmaking Industry (AR-101, revised May 2023): https://www.plasticsindustry.org/data-report/customs-and-practices-of-the-moldmaking-industry/
Brent Hanke | Legacy Molding | 480-256-9773 | b.hanke@legacy-molding.com
Brent Hanke is the owner of Legacy Molding, a custom plastic injection molder in Phoenix, Arizona, producing parts for OEMs across the Southwest and the country.
Have a part like this to quote?
Send the CAD and annual volume. A Phoenix engineer replies within one business day with pricing and DFM notes.
