CNC Machining vs Injection Molding: When to Machine Plastic
Last Updated: October 31, 2026
Answer Capsule: CNC machining vs injection molding is a volume and tolerance decision. Machining cuts each part from acetal, nylon or PEEK stock with no tooling cost and wins below a few hundred parts or at the tightest tolerances. Injection molding needs a mold but drops the part price to dollars or cents and wins once volume reaches the hundreds or thousands.
You need 50 plastic parts next month and 5,000 next year, and the two quotes on your desk do not compare. The machine shop wants a price per part and no tooling. The molder wants a mold up front and a part price that looks like a rounding error. CNC machining vs injection molding is not about which quote is right; it is about which one fits the volume you will actually buy.
Founders get this wrong in both directions. Some buy a mold for a product that sells 300 units. Others machine the same bracket for three years at a price that would have paid for the mold several times over.
This guide gives you that calculation with every assumption labeled. It covers which plastics machine well, how tolerances and surfaces differ, when to machine the first 50 and mold the next 5,000, and what to send for quotes. Legacy Molding is an injection molder in Phoenix and does not machine parts.
What is the difference between CNC machining and injection molding?
CNC machining cuts a part out of a solid block, rod or sheet of plastic with a mill or lathe. Injection molding melts pellets and forces them into a mold that forms the finished shape in one shot. One process removes material. The other replicates a cavity.
Machining starts with stock shapes. The shop buys rod and plate in acetal (often specified as Delrin), UHMW, nylon, polycarbonate, PEEK or PTFE and cuts away everything that is not the part. There is no tooling, so the first part costs about the same as the hundredth. A guide hosted by the University of Virginia notes that acetal is the most popular machining plastic and that stock sizes and tolerances vary by material.
Molding starts with a mold. The tool defines the walls, ribs, bosses, draft and finish. Once it exists, each part costs material plus seconds of press time. Legacy Molding runs this side on presses under 200 tons.
Is CNC machining cheaper than injection molding?
CNC machining is cheaper for small quantities because it has no tooling cost. Injection molding is cheaper once the mold is spread over enough parts. The crossing point is the break-even volume, and you can calculate it in one line.
Break-even volume = mold cost divided by (machined price per part minus molded price per part).
Here is a worked example with labeled illustrative assumptions, not quotes. Say a palm-sized acetal bracket machines at $45 each in lots of 50. A simple single-cavity aluminum tool is quoted at $6,000, near the low end of Legacy Molding’s published $3,000 to $100,000-plus range, and the molded part at $2.00. Break-even is $6,000 divided by $43, or about 140 parts.
Swap in a hardened steel Class 101 tool at $30,000 and a molded price of $0.80. Break-even moves to about 680 parts. Above either number, every machined part costs you money against the mold you did not buy.
In practice the range runs from a few hundred parts for simple shapes to a few thousand for complex ones. The injection molding cost hub works the amortization table at 5,000, 50,000 and 500,000 parts. The injection molding vs 3D printing post runs the same math against a printer.
CNC machining vs injection molding at a glance
| Factor | CNC machining | Injection molding |
|---|---|---|
| Tooling cost | None; fixturing only | Published range: $3,000 simple aluminum to $100,000+ multi-cavity steel |
| Per-part cost | Flat, set by machine time and stock; tens of dollars and up | $0.10 to $5 or more; pennies at 100,000+ |
| Lead time to first part | Days | Simple molds 2 to 4 weeks; complex production molds 6 to 12 weeks |
| Materials | Stock shapes: acetal, UHMW, nylon, PC, PEEK, PTFE, cast acrylic | Pellets: ABS, nylon, PC, PP, HDPE, acetal, TPE/TPU, PEEK and Ultem on request |
| Tolerances | Tightest available on stable materials; material and size set the limit | Plus or minus 0.005 in standard; 0.002 in on critical dimensions |
| Surface | Tool marks; 63 to 32 microinch typical | Replicates the cavity: polish, texture, molded-in color and text |
| Legacy Molding offers it | No | Yes |
How do machined and molded parts differ in tolerance and surface?
Machined parts can hold tighter tolerances than molded parts, but the material sets the limit. A molded part has a finish a machined part cannot copy without hand work. The University of Virginia guide is blunt: under the right conditions a machined plastic part can hold plus or minus 0.0002 in, while in opposing situations plus or minus 0.005 in is challenging. Thermal expansion is the usual reason; on a large part, body heat alone can move it out of spec.
Molded tolerances come from the tool and the resin. Shrink, moisture and wall uniformity set what the cavity can hold. Legacy Molding’s published figures are plus or minus 0.005 in standard and plus or minus 0.002 in or better on critical dimensions. The injection molding design guide covers the wall, draft and rib rules behind those numbers.
Surfaces go the other way. A machined part shows tool paths and needs polishing for a cosmetic face. A molded part copies the cavity, so polish, texture, molded-in color and text come free with every shot.
Brent Hanke’s rule for a part that will eventually be molded: put draft and uniform walls in the CAD before you machine the prototypes. Otherwise the molded part will not match the parts you tested.
When should you machine the first 50 and mold the next 5,000?
Machine the first parts when the design is still moving or the quantity is small. Move to a mold once the design freezes and the forecast clears break-even. The two processes are not rivals. They are stages.
Here is a call Legacy Molding gets most months. A founder has 40 machined acetal housings in the field, a CAD file, and a purchase order for 3,000 more. The machined price is fine for 40 and painful for 3,000. The design has not changed in six months, so that is a molding job.
The first question is whether the machined CAD has draft, uniform walls and a parting line, because machined parts usually do not. The DFM review adds those, often without changing anything the customer touches. The reverse call is just as common: three sizes of a part, each under 100 pieces a year, in a material that machines well. That part should stay machined, and Legacy Molding will say so.
Machine when:
- You need fewer than a few hundred parts and the forecast is soft.
- The design is still changing.
- Tolerances are tighter than molding can hold.
Mold when:
- The design is frozen and volume clears break-even.
- The part needs a cosmetic finish, molded-in features or an elastomer.
What should you send to get both quotes?
Send the same package to both shops. Include a STEP, IGES or SolidWorks file, a drawing with only the critical dimensions toleranced, the material by trade name and ASTM spec, annual volume with lot size, surface finish, and any secondary operations. Legacy Molding quotes in 24 to 48 business hours, or 3 to 5 business days for complex DFM. Tell both shops the expected program length, because it changes the amortization.
Frequently Asked Questions
Can you CNC machine plastic parts?
Yes. Acetal, UHMW, nylon, polycarbonate, PEEK and PTFE all machine well from rod and plate. Soft materials such as TPE and TPU do not, which is one reason a flexible grip or seal is a molded part at any volume.
At what volume does injection molding become cheaper than CNC machining?
Divide the mold cost by the difference between the machined and molded part prices. For small simple parts that is often a few hundred units; for complex parts with expensive tools it can be a few thousand. Use your own quotes.
Does Legacy Molding machine plastic parts?
No. Legacy Molding is a custom injection molder in Phoenix, Arizona, running production on presses under 200 tons. If your quantity is small and the design is still moving, a plastics machine shop is the right stop. When the design freezes and the volume climbs, send the CAD for a DFM review and a mold quote.
Conclusion
Three takeaways. Machining has no tooling and wins below a few hundred parts, on moving designs and on the tightest tolerances. Molding needs a mold and wins once volume clears break-even, on cosmetic finish and on molded-in features. The clean path is to machine the first parts, freeze the design, then move to a mold with draft and uniform walls already in the CAD.
If your part is ready for that move, Legacy Molding will review it for manufacturability and ship a first article inspection report with the first lot. Send your CAD and annual volume for a quote with DFM notes, or call Brent Hanke at 480-256-9773.
Sources
- University of Virginia (hosted), Understanding the Art of Machining Plastics, Tom Rohlfs: https://galileo.phys.virginia.edu/research/groups/hep/aag/useful_info/machining_plastics.pdf
Brent Hanke | Legacy Molding | 480-256-9773 | b.hanke@legacy-molding.com
Brent Hanke is the owner of Legacy Molding, a custom plastic injection molder in Phoenix, Arizona, producing parts for OEMs across the Southwest and the country.
Have a part like this to quote?
Send the CAD and annual volume. A Phoenix engineer replies within one business day with pricing and DFM notes.
