Injection Molding Wall Thickness, Ribs and Bosses: The Design Rules
Injection molding wall thickness rules by resin, the 25 percent variation limit, rib thickness and height ratios, boss sizing and how to core out thick parts.
Injection molding wall thickness rules by resin, the 25 percent variation limit, rib thickness and height ratios, boss sizing and how to core out thick parts.
Injection molding draft angle rules: 1 degree per side on walls, 0.5 on ribs and bosses, more per inch of depth and on texture, plus where draft gets missed.
Warpage in injection molding: why parts bow and twist, which resins warp most, the fixes in the order a molder tries them, and the design rules that prevent it.
Jetting in injection molding: what the snake-like mark at the gate means, why melt jets into an open cavity, fixes in order, and the gate rules that prevent it.
Flow lines in injection molding: how to tell them from splay and weld lines, why the melt front stalls, the fixes in order, and the design rules that stop them.
Weld lines in injection molding: how to tell a knit line from a flow line, why the seam is weak, fixes in the order a molder tries them, and the design rules.
Injection molding tolerances explained: the standard 0.005 in and precision 0.002 in figures, why plastic moves, tolerance by resin, and what tight specs cost.
Sink marks in injection molding: thick sections, rib and boss ratios, pack pressure and gate freeze, with fixes in order and the design rules that prevent them.
Short shot injection molding guide: why parts do not fill, venting, pressure, temperature, gate and wall causes, and fixes in the order a molder tries them.